Solenoid Valve

Direct-acting solenoid valve, compact structure with little gap, easily washed. Media only comes to contact with valve body, is sealed with FFKM.

Valve body is seperated from coil, low heattransfer.

 

Features

Non-dead zone offered according to customers’ need

Compact structure

The liquid is seperated from the structure itself

Valve material：PEEK ( polyether-ether-ketone ),

kynar, ethylene-tetrafluoroethylene copolymer (ETFE)

 

Applications

Medical technology

Biological technology

Analser , disinfectors

Strong acid, oxidized liquid

 

Parameter

Rated voltage：12、24V/DC；

Voltage tolerance：±10%

Power consumption：3.4 W 、4W

Workload cycles: 100% continuous work .

Frequence: About 300 times/min

Protection grade : IP54（with cable)  IP40(Rectangular socket)

Valve material: G1/8 and tube valve body : polyvinylidene difluoride (PVDF)

UNF valve body: ethylene-tetrafluoroethylene copolymer (ETFE)

Seal : Perfluor rubber ;

Fluid:  Aromatic hydrocarbons , ethers, esters,  ketone solvents.

( Polyether ether ketone valve body only)

Temperature of fluid : 10-50℃ / 0-50℃

Max environments temperature : 50/55 degrees centigrade

Val max: About 21m㎡/S ; time：25ms

 

1.   A level loop function

Two-way valve，Straight-through ，normally-closed

Category A  electromagnetic valve is closed when the electricity was turned off.

The electromagnetic valve  will produce the electromagnetic force when it is energized . It will make moving iron core and static iron core pull-in  ,and open the valve directly , allowing the media  flow  from import to export.

When the coil outages, the moving iron core will be reset with the help of the reset spring, and close the valve ,cut off the media.

 

2.     T level loop function

Two three –valves, direct-acting , common functions.

Category C electromagnetic valve is 2 and 3 channel whenthe electricity was turned off.

The electromagnetic valve  will produce the electromagnetic force when it is energized .it will make moving iron core and static iron core pull-in  ,and open the valve directly ,Allowing the media  flowing during the 2 channel and 1 channel.

When the coil outages, the moving iron core will be reset with the help of the reset spring, allowing the media flowing from 2 channel to 3 channel.

 

3.     Product standard

Installation form : undersurface  ,side face, undersurface&side face

Drift diameter : 08--0.8mm       16--1.6mm

Hickey : Q-Pagoda interface, G--Gthread, N--NPT thread

Valve material： 1-- PVDF    2-- PP

Sealing Material: F1-- FKM    FF-- FFKM

Voltage: 12-- 12V     24--24V     06--6V    01--110V      02-- 220V

Wiring: S--Terminal pin    L--down-lead

Structure : P-Project integration,  G-conduit

Withstand voltage : 1-- 1bar     2-- 2bar     3-- 3bar     4-- 4bar     5-- 5bar

Channel :two way valve, three way valve, four way valve

Dynamic form : E--solenoid valve , A--pneumatic valve , W--water valve

Product line：KV-- kamoer valve