Kamoer X1 PRO T Mini Peristaltic Dosing pump

  • Overview
  • Technical specifications
  • Purchases

Kamoer X1 PRO T Smart APP WIFI control peristaltic dosing pump



  • Brand:Kamoer
  • Flow rate > 70ml/min
  • Weight:316g (excluding power adapter)
  • Input: 100VAC~240VAC, output: DC12V, 2A
  • Speed range:0.1~350 rpm
  • Volume range: 0.1ml~9999ml
  • Minimum addition volume: 0.1ml
  • Titration times: 24 times/day~1 time/99 days.
  • Size:100 x 92 x 63 mm
  • Working environment: temperature 0~70℃, humidity 10%~90% (non-condensing)
  • Storage environment: temperature -20℃~85℃, humidity 10%~90% (non-condensing)



Get to know X1 PRO T

1.Liquid outlet 2.Liquid inlet 3.KFS pump head 4.Indicator light 5.Reset button 6.DC 12V power 7.Fixing hole


  • The X1 PRO T is a single-channel stepper mini-pump, remotely controlled via a mobile app, with a long-life stepper motor that meets both precise addition and extended use requirements. motor for both precise dosing and extended use, can be used both as a titration pump and as a calcium inverse pump. It can be used both as a titration pump and as a calcium inverse pump. As a titration pump, it can flexibly and accurately replenish various elements required for marine life growth, such as Calcium, magnesium, KH enhancer, trace elements, etc. By automating the addition, the workload of manual addition is greatly reduced, and the leakage caused by manual addition is avoided. It also avoids the mistakes caused by manual addition such as omission, over-adding or under-adding. As a calcium inverse pump, it can provide a stable flow of water to the calcium reactor. The X1 PRO T stepper mini pump provides a steady flow of water to the calcium reactor.
  • The X1 PRO T stepper mini pump is a plastic gear pump that is free from slippage and rust. Highly reliable The X1 PRO T stepper micro pump is equipped with a plastic gear pump, which will not cause slippage and rust problems.




  1. Scan the QR code on the box or search "Kamoer Remote" to download the application. (Note: This App supports IOS 9.1 and above Apple devices, Android 4.4 and above Android devices.)
  2. Open the App, scan the QR code of the device or manually select the area where the device is located, register by cell phone or email, and follow the instructions of the App to complete the account note (Note: the selection of the area is very important, the wrong choice will lead to the inability to match the network, it is recommended to select the area by scanning the QR code of the device)
  3. You can click the "?" icon in the upper right corner of the device list page to enter the "Tutorial". Icon to enter the "Tutorial" page, in the tutorial page, select "X2SR" You can view the tutorials, including user manuals and common problem solving.



  • (If you can't connect to the app, please A-S-K C-U-S-T-O-M-E-R S-E-R-V-I-C-E, we will help you until you connect successfully!)
  • App Binding Devices.There are two ways to bind devices:


Way 1: Bind the device through the distribution method described above.

Way 2: If the device has been connected to the cloud through the router, the phone can be connected to the wireless router, the app will scan and display the available devices locally, and the user can directly click the "Bind" button on the right to finish binding.


  • App Unbind device:


Long press the corresponding device icon in the device list page, and the "Delete" icon will pop up at the bottom. Unbind.


  • Attentions:



  1. Please use the power adapter that comes with the product and work under the specified working environment.
  2. This product only supports 2.4G Wi-Fi, and does not support 5G Wi-Fi.
  3. The micro pump should be reasonably placed to ensure that the height difference between the inlet and outlet ports is within 0.5 meters.
  4. The inlet connection tube should be as short as possible and the outlet connection tube should be overhanging above the tank.
  5. Please check carefully if the liquid inlet and outlet are connected in the right direction, do not reverse the connection.



Connecting X1 PRO T to the cloud:

When the mini-pump is powered on for the first time out of the box, the status light (blue light) flashes slowly, at this time you need to use the App to connect the mini-pump to the cloud via the wireless router, as follows:


  1. The wireless router is connected to the Internet, and the phone is connected to the 2.4G Wi-Fi hotspot of the wireless router (the device does not support 5G Wi-Fi, so you cannot use the 5G Wi-Fi hotspot).
  2. Open KamoerRemote App, log in with your registered account, click the "+" icon at the upper right corner, enter the "Add Device" page, and select "X1 PRO T Micro Pump" from the list of supported devices. T Micro Pump" in the list of supported devices. 3.
  3. Enter the Wi-Fi password, click the "Next" button, press and hold the Reset button on the front panel for more than 6 seconds and then release it, click the "Next" button and wait for the blue status indicator to blink.
  4. Observe the blue light blinks every 2 seconds, click the "Blue light blinks at intervals" icon on the App interface, and follow the interface prompts to complete the network configuration. 5.
  5. After successful connection, the App will indicate successful connection, and the status light (blue light) will be on, which means the titration pump has been connected to the cloud, and the user has finished binding to the micro pump.



  • (If you can't connect to the app, please A-S-K C-U-S-T-O-M-E-R S-E-R-V-I-C-E, we will help you until you connect successfully!)





  1. Host (X1 PRO T)
  2. Power adapter DC12V 2A
  3. Plastic measuring cylinder: 10lm
  4. 2m PCV connection tube, translucent, 4 mm ID x 6 mm OD
  5. Quick start guide (English)
  6. Product Certificate of Conformity


W-a-r-r-a-n-t-y Service


  • The W-a-r-r-a-n-t-y service is only valid for users who install correctly according to the manual, normal use and maintenance. All man-made failures or damages are not covered by the W-a-r-r-a-n-t-y. Please keep the proof of purchase so that you can get satisfactory after-sales service in time.Within one year from the date of purchase, if any damage occurs due to manufacturing process or components, our company will provide free W-a-r-r-a-n-t-y service. Repair service. The free maintenance services provided during the W-a-r-r-a-n-t-y period include free repair, free supply and replacement of defective parts, and free repair of products that cannot be repaired. If the product cannot be repaired, it will be replaced with the same model.
  • The free service does not include the transportation cost of the product due to the repair.
  • Peristaltic pump pump head and pump tube are consumables and are not covered by the W-a-r-r-a-n-t-y.



Kamoer X1 PRO T Mini Peristaltic Dosing pump

In stock