KPAS100 24V Stepper Motor Micro Peristaltic Pump (20-110ml/min)
- Overview
- Technical specifications
- Purchases
KPAS100 Micro Peristaltic Pump with Stepper Motor
★ Suitable for the transfer of viscous and non-viscous liquids
★ Compact structure and high maintainability
★ A variety of pump tube materials are available
★ Exquisite and high-end appearance, high cost performance
Basic Parameters
Motor: Stepper motor
Voltage: 24V
Current: 1.2A
Flow rate: Less than 20-110ml/min
Rotating speed: 350rpm
Roller: 3 rotors
Working Temperature: 0-40℃
Humidity: Less than 80%
Pump material: PA & Nylon
Size(L*W*H): 55.3*79.6*42mm
Flow Rate & Tube Selection
|
Material |
BPT/Silicone |
||||
|
Code |
S/B14 |
S/B19 |
S/B16 |
||
|
ID*OD |
1.6×4.8 |
2.4×5.6 |
3.2×6.4 |
||
|
Rotors |
3 |
3 |
3 |
||
|
Flow Rate (ml/min) |
32 |
70 |
110 |
||
|
Tubes |
Materials |
Features |
Tubing Life |
||
|
S |
Silicone |
Low adsorption, good temperature resistance, not easy to aging, low precipitation, etc., chemical resistance. Corrosion performance decreases with increasing temperature. Suitable for transmission of various low corrosion(10%) Liquid. ▲ Working temperature: -60℃~200℃ |
≥200H |
||
|
B |
PharMedBPT |
Very good resistance to general chemicals, as well as excellent resistance to acids, alkalis and oxides. The product is transparent and resistant to ultraviolet radiation, so it helps protect sensitive liquids. ▲ Working temperature: -51℃~132℃ |
≥1000H |
||
Note: The above test data are measured at the pump head speed of 350 RPM without interruption and at room temperature of 20℃ under the condition of pure water without pressure until the pump pipe cracks appear. Pump head speed is different pump pipe life is not the same, in general, the slower the pump head speed, the longer the life of the pump pipe, the actual service life is affected by the media, working conditions, temperature and humidity, voltage and other factors, test data for reference.
Various Applications
# Experimental Research
# Experimental Monitoring
# Inkjet.Printing
# Aquarium
# Smart Home
# Aviation Operation
Packing List
▲ KPAS100-ST3/6-S/B14/19/16
1 × 24V 3 or 6 rotors pump with Silicone tube or BPT tube.
More Details
① Motor code
② Pump tube selection
③ Numbers of rotors
④ Connector selection
⑤ Installation method
▲ Zero-pollution
▲ The pump tube is not easy to slip.
▲ In the middle is L Plate . Others are the straight plate.
Clamp packaging only for Tube Size: 1.6*4.8
The right picture shows the suggested hole size drawing.
Dimension
▲ Straight plate
▲ L plate
Wire Description
